The Garment Sampling Process: From Proto to Production Approval
Sampling is the stage where a design becomes a real garment. Each sample teaches the factory and the brand something new, and approving samples carefully prevents expensive problems during bulk production.
The main sample stages
- Proto sample: The first version, made to test the pattern, fit and construction. Expect changes.
- Fit sample: A refined version on a fit model or a size-set, used to check measurements across sizes.
- Pre-production sample (PP): Made with the final fabric, trims and labels, exactly as the bulk will be produced.
- Production sample: Taken from the first bulk run to confirm the factory has matched the approved sample.
What to check at each stage
Measure the sample against your tech pack and tolerances. Check seam strength, stitch quality, label placement and colour matching under daylight. Try the garment on a fit model where possible, and test how the fabric moves.
Approving samples properly
Approve samples in writing, with photos and comments attached. Note any measurements that are out of tolerance and how they should be fixed. Keep one approved sample as the reference for the whole order.
Common sampling problems
Late changes to the tech pack, unclear colour standards and rushed approvals cause most delays. Agree on a sampling timeline with the factory at the start, and avoid approving bulk production until the pre-production sample is confirmed.
Tip: Approve the sample in the same fabric and trims you plan to use for bulk. Changing materials after approval is a common cause of quality complaints.